Description
STG92708 Starter AUC12656 21163-0754 for Kawasaki FX651V
Here’s the detailed technical breakdown for the STG92708 Starter (AUC12656/21163-0754) for Kawasaki FX651V engines:
🔧 Core Specifications
- Part Number: STG92708
- OEM Numbers:
- Kawasaki: 21163-0754 (primary), 21163-0756, 21163-7023
- John Deere: AUC12656, MIA11626
- Denso: 428000-6600, 428000-6601
- Voltage: 12V DC
- Power Output: 1.0 kW
- Rotation: Counter-Clockwise (CCW)
- Pinion Teeth: 10T
- Type: PMGR (Permanent Magnet Gear Reduction)
- Weight: ~2.2 kg (lightweight design)
✅ Exact Applications
- Kawasaki FX651V engines (65hp V-twin)
- John Deere equipment using Kawasaki engines
- Commercial mowers (Exmark, Scag, etc.)
- Industrial power units
⚙️ Technical Features
- PMGR Design Benefits:
- 40% lighter than conventional starters
- 300-350 rpm cranking speed
- Low current draw (≤80A under load)
- Durability Features:
- IP54 rated dust/water protection
- Oil-resistant shaft seal
- Hardened steel planetary gears
- Electrical Specs:
- No-load speed: 3,500±500 rpm
- No-load current: ≤45A
- Minimum operating voltage: 9.6V
🔄 Cross-Reference Compatibility
Brand | Part Numbers |
---|---|
Denso | 428000-6600 (OEM), SR428000-6600 (rebuild) |
Lester | 19169 |
J&N | 410-52301 (aftermarket) |
Kawasaki | 21163-0754, -0756, -7023 |
John Deere | AUC12656, MIA11626 |
⚠️ Critical Installation Notes
- Flywheel Compatibility:
- Requires 98-100mm flywheel diameter
- 10-tooth pinion matches 3.0 module gear
- Mounting:
- 2-bolt pattern (M8x1.25)
- 37mm center bore
- 5mm mounting flange thickness
- Electrical Connections:
- Main terminal: M6 stud
- Solenoid terminal: 4.8mm female spade
- Maintenance:
- Maximum 10-second continuous cranking
- 30-second cooldown between attempts
- Annual brush inspection recommended
📌 Procurement Guidance
Available through:
- Kawasaki Engine Dealers (for OEM parts)
- Landscape Equipment Suppliers
- Denso Starter Distributors
- John Deere Agricultural Dealers
Tip: When replacing, always:
✔ Verify CCW rotation matches your engine
✔ Check flywheel teeth for wear
✔ Apply dielectric grease to terminals
✔ Torque mounting bolts to 18-22 Nm
Reviews
There are no reviews yet.